Toshiba A10 Series Manual Do Utilizador
O
PERATING
B
ASICS
4-3
Disconnecting 3 1/2" diskette drive
When you have finished using the diskette drive, follow the procedures below to
disconnect it:
disconnect it:
1.
Wait for the indicator light to go out to make sure all diskette activity has
stopped.
stopped.
CAUTION: If you disconnect the diskette drive or turn off the power
while the computer is accessing the drive you may lose data or damage
the diskette or the drive.
while the computer is accessing the drive you may lose data or damage
the diskette or the drive.
2.
Click the
Safety Remove Hardware
icon on the Task Bar.
3.
Click
Diskette drive
.
4.
Pull the diskette drive connector out of the USB port.
Using optical media drives
The full-size drive provides high-performance execution of CD/DVD-ROM-based
programs. You can run either 12 cm (4.72") CD/DVDs or 8 cm (3.15") CD without an
adaptor. An ATAPI interface controller is used for CD/DVD-ROM operation. When
the computer is accessing a CD/DVD, an indicator on the drive glows.
programs. You can run either 12 cm (4.72") CD/DVDs or 8 cm (3.15") CD without an
adaptor. An ATAPI interface controller is used for CD/DVD-ROM operation. When
the computer is accessing a CD/DVD, an indicator on the drive glows.
NOTE: Use the WinDVD 4 application to view DVD-Video discs.
If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs section for
precautions on writing to CDs.
precautions on writing to CDs.
Using optical media drives