Toshiba 960-498 Manual Do Utilizador

To execute this program, select 2-Repair initial config set in the startup menu, 
press Enter and follow the directions on the screen. The H/W initial information setting tool 
consists of following subtests. Move the highlight bar to the subtest you want to execute and 
press Enter.  

Subtest 01  

Initial configuration 

 

 

 

 

This subtest executes the following items and shows their contents in the 
display. When an item ends normally, the program proceeds automatically to 
the next one. When an error is found, the program stops and waits for key 
input. (After solving the problem, the program executes the item again.) 

• 

Setting of the CPU set table 

• 

Setting of the micro code 

• 

Setting of the EHSS 

• 

Inputting and writing of DMI information 

 

 

 

 

 

 

When the DMI information is displayed,  the following messages 
appear in order. Input each information. (If you do not replace the 
PCB, the DMI information should not be changed.) 

1.  “Enter Model Name ?” is displayed. Input the computer’s 

model name and press Enter. (e.g. Satellite) 

2.  “Enter Version Number ?” is displayed. Input the 

computer’s version number and press Enter.  (e.g. 
PC18070C313S) 

3.   “Enter Serial Number ?” is displayed. Input the 

computer’s serial number and press 

. (e.g. 12345678) 

4.  “Enter Model Number ?” is displayed. Input the computer’s 

sales model number and press 

. (e.g. PP200-AAAAA) 

5.   “Enter Bundle Number ?” is displayed. Input the 

computer’s PCN/Bundle number and press 

.  

(e.g. PMSREQ3Q34H/S0123456789) 

6.  “Write data OK (Y/N) ?” is displayed. To write the DMI 

information to the Flash ROM, press 

,

and then 

. 

7.  “Create DMIINFO TXT (Y/N) ?” is displayed. Press 

 

then the DMI information (text data) is written to the Floppy disk, 
etc.