Toshiba 960-498 Manual Do Utilizador

Take note of the following points before starting work. Always remove the AC adapter and 
battery pack before commencing any of the procedures. The procedure for removing the 
battery pack is described in section “4.2.1 Battery Pack”. 

1.  Do not disassemble the computer unless it is operating abnormally. 

2.  Use the designated tools. 

3.  Ensure that the environment for working on and storing parts does not contain any of 

the following. 

Dust or dirt 

• 
• 
• 

Static electricity 

Extremely hot, cold or humid conditions 

4.  Perform the diagnostic tests described in Chapter 2 to determine which FRU is the 

cause of the fault. 

5.  Do not perform any unnecessary work. Always work in accordance with the 

disassembly and reassembly procedures in this manual. 

6.  Keep parts removed from the computer in a safe place away from the computer where 

they will not be damaged or interfere with your work. 

7.  Disassembling requires the removal of a large number of screws. Keep removed 

screws in a safe place such that you can determine which screws belong to which part. 

8.  When reassembling, ensure that you use the correct screws and fit parts in the correct 

position. Screw sizes are noted in the text and figures. 

9.  As all parts have sharp edges and corners, take care not to cut yourself. 

10. After replacing an FRU, check that the computer and replaced part operate correctly.