Toshiba 960-498 Manual Do Utilizador

4.3 HDD

4 Replacement Procedures

4.3 HDD

Removing the HDD

The following describes the procedure for removing the HDD (See Figure 4-4 and 4-5).

CAUTION: Be careful not to drop or leave screws in the PC.

Take care not to press on the top or bottom of the HDD. Pressure may cause

data loss or damage to the device.

1. Turn the computer upside down.

2. Remove the following screw fixing the HDD slot cover and remove the HDD slot

cover.

• M2.5×10B

FLAT BIND screw

3. Hold the tab and pull out the HDD assembly from the connector CN1800 on the

system board.

HDD assembly

HDD slot cover

M2.5x10B FLAT BIND

Tab

CN1800

Figure 4-4 Removing the HDD assembly

4-12

QOSMIO F10 Maintenance Manual (960-498)