Toshiba 960-498 Manual Do Utilizador

The following describes the procedure for removing the bluetooth (See Figure 4-10). 

1.  Disconnect the bluetooth flat cable from the connector CN4400 on the system board. 

2.  Turn up the insulator to take out the bluetooth module from the guide of the display 

assembly. 

3.  Disconnect the bluetooth antenna cable (black cable with marking) from the 

bluetooth module. 

4.  Disconnect the bluetooth flat cable from the connector on the bluetooth module. 

 

bluetooth flat cable 

Guide 

bluetooth antenna cable 

Marking 

bluetooth module 

Insulator 

CN4400 

The following describes the procedure for installing the bluetooth (See Figure 4-10). 

1.  Connect the bluetooth flat cable to the connector on the bluetooth module. 

2.  Connect the bluetooth flat cable to the connector CN4400 on the system board. 

3.  Turn up the insulator to fit the bluetooth module to the guide of the display 

assembly. 

4.  Connect the bluetooth antenna cable (black cable with marking) to the bluetooth 

module.