Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Toshiba
  4. 960-498
  5. Manual Do Utilizador

Toshiba 960-498 Manual Do Utilizador

Download
Página de 365
4.9  SD board/MDC 
4  Replacement Procedures  
4-34 
 
QOSMIO F10  Maintenance Manual (960-498) 
4.9.2 MDC 
Removing the MDC 
The following describes the procedure for removing the MDC (See Figure 4-20). 
1.  Turn over the SD board. 
2.  Remove the following screws fixing the MDC and pull the MDC straight up from the 
connector CN3000 on the SD board. 
•  M2×4Z BIND 
screw   x2 
3.  Remove the RJ11 harness from the MDC. 
 
M2
×4Z BIND 
MDC 
RJ11 harness 
CN3000
Figure 4-20  Removing the MDC 
Installing the MDC 
The following describes the procedure for installing an MDC (See Figure 4-20). 
1.  Connect the RJ11 harness to the MDC. 
2.  Connect the MDC to the connector CN3000 on the SD board. 
3.  Secure the MDC with the following screws. 
•  M2×4Z BIND 
screw   x2