Toshiba 960-498 Manual Do Utilizador

2  

This section describes how to determine if the USB 3.5” FDD is functioning properly. 
Perform the steps below starting with Procedure 1 and continuing with the other procedures as 
required. 

Procedure 1:  FDD Head Cleaning Check 
Procedure 2:  Diagnostic Test Program Execution Check 
Procedure 3:  Connector Check and Replacement Check 

FDD head cleaning is one option available in the Diagnostic Program.  

Insert the Diagnostics Disk in the floppy disk drive of the computer, turn on the computer and 
run the test. And then clean the FDD heads using the cleaning kit. If the FDD still does not 
function properly after cleaning, go to Procedure 2. 

Detailed operation is given in Chapter 3, Tests and Diagnostics. 

If the test program cannot be executed on the computer, go to Procedure 3.