Fujitsu R630 Manual Do Utilizador

  

A26361-K680-Z122-1-7619, Edition 1 

3 

 

In this chapter you will find information regarding safety which it is essential to take note of when 
working with your workstation. 

 

Pay attention to the information provided in the "Safety" manual and in the following safety 
notes. 
During installation and before operating the device, please observe the instructions on 
environmental conditions in the "Technical data" chapter as well as the instructions in the 
"Preparing for use" chapter. 
You may only operate the device, if the voltage for the device is set to the local mains 
voltage (see chapter "Technical data"). 
The main switch (if present) and the ON/OFF switch do not disconnect the workstation 
from the mains voltage. To completely disconnect the mains voltage, remove the power 
plug from the grounded mains outlet. 
Remove the power plug before opening the device. 
Replace the lithium battery on the mainboard in accordance with the instructions in the 
"Extensions to the mainboard" - "Replacing lithium battery" section. 
Caution, components in the system can get very hot. 

 

Further information can be found on the "User Documentation" or "Drivers & Utilities" CD provided 
with your computer. 

 

The shipped version of this device complies with the requirements of the EEC directives 
89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low voltage directive".