Fujitsu R630 Manual Do Utilizador

Troubleshooting and tips 

 

24 

A26361-K680-Z122-1-7619, Edition 1 

If your screen remains blank this may be due to the following: 

Monitor is switched off 
► 

Switch your monitor on. 

Power saving has been activated (screen is blank) 
► 

Press any key on the keyboard. 

or 
► 

Deactivate the screen saver. Enter the appropriate password. 

Brightness control is set to dark 
► 

Adjust the brightness control. For detailed information, please refer to the operating manual 
supplied with your monitor. 

Power cable not connected 
► 

Switch off the monitor and the workstation. 

► 

Check whether the power cable of the monitor is properly connected to the monitor and to the 
mains outlet. 

► 

Check that the power cable of the workstation is plugged properly into the workstation and 
grounded mains outlet. 

► 

Switch on the monitor and the workstation. 

Monitor cable not connected 
► 

Switch off the monitor and the workstation. 

► 

Check that the monitor cable is properly connected to the workstation and monitor. 

► 

Switch on the monitor and the workstation. 

Wrong monitor has been set under Windows 2000 
► 

Restart the workstation. 

► 

If the message Starting Windows appears, press function key  F8  

The Windows 2000 Advanced Options Menu appears. 
► Select 

Safe Mode or Safe Mode with Network. 

► 

Set the correct values for the attached monitor as described in the operating manual of the 
monitor by selecting Start - Settings - Control Panel - Display - Settings.