Fujitsu 6000 Manual Do Utilizador

74

●

Use the keyboard to exit Windows 95/98 as follows:
1 Press the 

 key or the Ctrl + Esc keys.

The Start menu appears.

2 Select “Exit Windows” with the 

↑

 or 

↓

 key and press the Enter key.

The Exit Windows dialog box is displayed.

3 Select “Turn off power” and press the Enter key.

Windows 95/98 ends.

●

Check the following:
- Is the SCSI card driver installed correctly? Proceed as follows.

1 From the Start menu, select Setup and click on Control Panel.

The Control panel window is displayed.

2 Double click on the System icon.
3 Click on the Device manager tab and confirm that the SCSI controller is defined.

If not defined, click on the Hardware icon in the Control Panel window to detect a
SCSI card and install the driver.

- Is the SCSI unit turned on before the computer is turned on? If the computer is turned on

before the SCSI unit is turned on, the SCSI unit cannot be identified.

○

○

○

○

○

○

○

If the cause is still unknown or the system cannot be reset, contact a dealer or your local
distributor. Then check and record the following:
- Model name and serial number of the computer (See the label at the rear of the

computer.)

- OS and version used
- Types of extension cards and memory installed
- Circumstances (the particulars, including the messages displayed on the screen, etc.)
- Date and time an error occurred