Intel ESM-2740 Manual Do Utilizador
User’s Manual
ESM-2740/2743 User’s Manual
37
2.4.7
Signal Description – ETX Connector X3 (ETXC)
2.4.7.1 LVDS Flat Panel Interface Signals
Signal
1 Pixel / Clock LVDS Mode
2 Pixel / Clock LVDS Mode
LCDDO0
Txout0#
Odd Txout0#
LCDDO1 Txout0
Odd
Txout0
LCDDO2
Txout1#
Odd Txout1#
LCDDO3 Txout1
Odd
Txout1
LCDDO4
Txout2#
Odd Txout2#
LCDDO5 Txout2
Odd
Txout2
LCDDO6
Txclk#
Odd Txclk#
LCDDO7 Txclk
Odd
Txclk
LCDDO8
Txout3#
Odd Txout3#
LCDDO9 Txout3
Odd
Txout3
LCDDO10
-
Even Txout0#
LCDDO11 -
Even
Txout0
LCDDO12
-
Even Txout1#
LCDDO13 -
Even
Txout1
LCDDO14
-
Even Txout2#
LCDDO15 -
Even
Txout2
LCDDO16
-
Even Txclk#
LCDDO17 -
Even
Txclk
LCDDO18
-
Even Txout3#
LCDDO19 -
Even
Txout3
BIASON
Controls panel contrast voltage.
DIGON
Controls panel digital power.
ENBKL#
Controls backlight power enable.
I
2
C_DAT, I
2
C_CLK
I
2
C interface for panel parameter EEPROM. This EERPOM is mounted on the
LVDS receiver. The data in the EEPROM allows the EXT module to automatically
set the proper timing parameters for a specific LCD panel.
set the proper timing parameters for a specific LCD panel.
2.4.7.2 IrDA
(SIR)
Signals
Signal
Signal Description
IRTX, IRRX
Infrared transmit and receive pins.
2.4.7.3
Parallel Port Signals
Signal
Signal Description
STB#
This active-low signal is used to strobe the printer data into the printer.
AFD#
This active-low output tells the printer to automatically feed the next single line
after each preceding line has been printed.
after each preceding line has been printed.
PD[0:7]
This bi-directional parallel data bus is used to transfer information between the
CPU and the peripherals.
CPU and the peripherals.
ERR#
This active-low signal indicates an error situation has occurred at the printer.
INIT#
This active-low signal is used to initiate the printer when low.
SLIN#
This active-low signal selects the printer.
ACK#
This active-low output from the printer indicates that it has received the previous
data and that it is ready to receive new data.
data and that it is ready to receive new data.