Apollo 150 Manual Do Utilizador

 

Before getting started, read these instructions and save 

them for later reference.   
1. Turn off the computer before cleaning. Clean with a 

damp or dry cloth only.  Do not spray any liquid cleaner 
on screen directly.   

2. The power outlet socket used to plug in the computer 

power cord must be located near the system and easily 
accessible.  Do not use outlets on the same circuit of 
the systems that regularly switched on and off. 

3. Make sure the voltage of the power source is correct 

before connecting the computer to the power outlet. 

4. If the computer is sharing an extension cord with other 

devices, make sure the total ampere rating of the 
devices plugged into the extension cord does not 

exceed the cord’s ampere rating.   

5. Do not expose the power cord, extension cord and 

power outlet to moisture. 

6. Install the computer on a reliable surface to prevent 

damage caused by dropping. 

7. This computer is not equipped with an operating 

system.  An operating system must be loaded first 

before installing any software into the computer. 

8. Disconnect the power cord from the computer before 

any installation. Make sure both the computer and the 
external devices are turned off.  The sudden surge of 

power may ruin any sensitive components.   Also make 
sure the computer is properly grounded. 

9. During installation of any internal components, be sure 

to ground yourself to keep from any static charge. 

Most electronic components are sensitive to the static 
electric charge. Use a grounding wrist strap and place 
all electronic components in any static-shielded 

devices.