Acer Altos G710 Manual Do Utilizador

159

Configuring the SCSI/SCSI RAID HBA

This section shows how to create a RAID 1 (mirror) volume. This feature 
requires the installation or presence of a LSI Logic 53C1030 SCSI 
controller.   

Using the SCSI HBA setup utility

During bootup, press Ctrl+C to enter the LSI Logic Configuration 
screen.  

Loading the HBA default settings

1

In the LSI Logic MPT SCSI setup screen, press F2. 

2

Select Global Properties, then select Restore Defaults.

3

Press Esc, then select Save changes then exit this menu. 

4

Select 53C1020/53C1030, then press Enter.

5

Select Restore Defaults, then press Enter. 

6

Press Esc, then select Save changes then exit this menu. 

Using the SCSI RAID HBA setup utility

Creating a RAID 1 volume with a hot spare disk

1

In the LSI Logic MPT SCSI setup screen, select 53C1020/53C1030, 
then press Enter.

2

Select RAID Properties, then press Enter. 

3

In the Array Disk field, press the spacebar.

If you change the settings in the Array Disk field, the following 
messages appear:

4

Press the Delete key to erase all data on the screen.

5

In the Hot Spare field, press the spacebar.