Avaya V880 Instrução De Instalação

This section describes how you clean the tape drive. 

Note:

Starting around June, 2004, CMS servers will no longer ship with tape drive 
cleaning tapes. Avaya recommends that customers purchase at least one 
cleaning tape as soon as the server is installed and in service.

The number of cleaning cycles available on a cleaning cartridge depends on the 
manufacturer of the cartridge. Regular cleaning is recommended to maximize tape drive 
performance. Avaya recommends that you clean the tape drive once a week or every five 
(5) data backups, whichever comes first.

The LEDs on the tape drives indicate when the tape drives need cleaning. See 

on page 178. If the Clean LED flashes, either the tape drive heads need cleaning, or 

the backup tape needs replacing.

To clean the tape drive:

1. Load the cleaning cartridge into the tape drive.

The cleaning cycle begins automatically, and the Tape LED flashes. When the cleaning 
cycle is complete, the cleaning cartridge is ejected automatically. If the cleaning 
cartridge does not eject automatically, it may be defective and may need replacing.

2. The first time you use the cleaning cartridge, record the date on the cleaning cartridge. 

Each time you clean the tape drive, mark an X in the box. After all boxes are filled, 
replace the cleaning cartridge.

3. Return the cleaning cartridge to the plastic protection box.

If the Clean LED continues to flash, repeat the cleaning procedure using a different 
cleaning cartridge. If the Clean LED is still flashing, repeat the backup operation with a 
different tape. If this clears the signal, the first backup tape is nearing the end of its life. 
Discard the old tape.