Avaya V880 Instrução De Instalação
Tools
Issue 2.0 June 2004
165
Using the cfgadm command
The cfgadm command displays diagnostic information about CPU/Memory boards, SCSI
controllers, and PCI cards.
controllers, and PCI cards.
To display this diagnostic information, enter:
cfgadm
The following is an example of the results for the computer.
●
SBa
through SBd show the status of the four CPU/memory boards. In this example there
is one CPU/Memory board in Slot A.
●
c0
shows the status of the internal SCSI controller.
●
c2
shows the status of the SCSI controller on the SunSwift card.
●
pcisch0
through pcisch3 show the status of the PCI slots. In this example, the
following cards are installed:
- Slot 0 - Dual FastEthernet and Dual SCSI card
- Slot 1 - FastEthernet card
- Slot 2 - FastEthernet card
- Slot 3 - HSI/P card
- Slot 4 - HSI/P card
- Slot 7 - Graphics card
Ap_Id Type Receptacle Occupant Condition
SBa cpu/mem disconnected configured ok
SBb none empty unconfigured ok
SBc none empty unconfigured ok
SBd none empty unconfigured ok
c0 scsi-bus connected configured unknown
c2 scsi-bus connected configured unknown
pcisch0:hpc1_slot0 pci-pci/hp connected configured ok
pcisch0:hpc1_slot1 bridge/hp connected configured ok
pcisch0:hpc1_slot2 bridge/hp connected configured ok
pcisch0:hpc1_slot3 unknown/hp connected configured ok
pcisch2:hpc2_slot4 unknown/hp connected configured ok
pcisch2:hpc2_slot5 unknown empty unconfigured unknown
pcisch2:hpc2_slot6 unknown empty unconfigured unknown
pcisch3:hpc0_slot7 vgs8514/hp connected configured ok
pcisch3:hpc0_slot8 unknown empty unconfigured unknown
usb0/1 usb-mouse connected configured ok
usb0/2 usb-kbd connected configured ok
usb0/3 unknown empty unconfigured ok
usb0/4 unknown empty unconfigured ok