Avaya V880 Instrução De Instalação

An HSI/P card supports X.25 switch links. For eight links, two HSI/P cards and two quad 
cables are needed. If the system uses TCP/IP signaling for all links, HSI/P cards are not 
needed. HSI/P cards are not supported beginning with CMS R12.

!

!

Important:

The HSI/P card does not support hot-plug operation. You must shut down 
the system and turn off power before installing or replacing a card.

This section includes the following topics:

●

●

●

●

●

If you are replacing a defective HSI/P card, see 

this is the initial installation of one or two HSI/P cards, start with 

on page 85. If a second HSI/P card is being added to a 

system already in operation, see 

To replace an HSI/P card:

1. Log in to the system as root.

2. Enter:

This displays the PCI card configuration before you replace a card. Recheck the 
configuration after you have replaced the card.

3. Enter:

This shuts down the system.

4. Press and release the front panel power button to turn off the system.

Wait for the front panel Power/OK LED to turn off.