Emerson ATCA-S201 Manual Do Utilizador
RTM-ATCA-SXXX Overview
6806800H62B
ATCA‐S201 Installation and Use Guide
120
Figure 37, Ethernet Management Port
11.3.3 Serial Console Port (RJ-45)
An RS232 serial console port is provided on the RTM-ATCA-SXXX to facilitate a pass-
through communication path to certain ATCA board products. The port uses an
through communication path to certain ATCA board products. The port uses an
RJ45 connector.
11.4 LEDs
The following LEDs are located on the face plate of the RTM-ATCA-SXXX.
Table 56 LEDs On RTM Faceplate
LED
RTM Faceplate
On
LAN management activity LED
Ethernet Activity
AMBER
Off No
Activity
On
LAN management LINK LED
Ethernet Link
GREEN
Off No
Link
On
Management power available to the module
and the module can safely be extracted
and the module can safely be extracted
Off
The module is operational and is unsafe for
extraction
extraction
Long Blink
Delay before module is activated
Hot Swap (HS) BLUE
Short Blink
Delay before module is de-activated
On
Module Fault set by Shelf manager or
12V payload power not detected.
12V payload power not detected.
Fault or “Out of Service” (OOS) RED
Off
No module fault
12V payload power is being supplied to board
12V payload power is being supplied to board
On
12V payload power is being supplied to board
Module Ready (OK) and “in service”
GREEN
Off
12V payload power is not detected