Exmark 000 & higher Manual Do Utilizador
Specifications
•
Deck Height Adjustment Lever: Sets cutting
height to desired position.
height to desired position.
•
Deck Lift Pedal: Foot pedal that lifts deck.
•
Transport Lock:
–
Latching position: Automatically latches at
the transport position.
– Unlatching position: Deck does not latch at
the transport position.
Seat
•
Type: Standard seat with high back, extra
wide foam padded seat cushion with internal
suspension, thick bolstering, two-tone cover,
armrests, integral safety switch, and seat vibration
isolation system.
wide foam padded seat cushion with internal
suspension, thick bolstering, two-tone cover,
armrests, integral safety switch, and seat vibration
isolation system.
Optional seat accessories for units with standard
seats:
seats:
– Custom ride suspension system to enhance
Standard Seat. Adds approximately 3 inches
(7.6 cm) to seat height.
(7.6 cm) to seat height.
– Deluxe suspension seat with high back, low
profile foam-in-place cushion (dampened,
adjustable spring suspension), armrests, and
integral safety switch. Seat height remains the
same.
adjustable spring suspension), armrests, and
integral safety switch. Seat height remains the
same.
– Seat Isolation System for reduced vibration,
to enhance ride of standard seat, standard seat
with Custom Ride Seat Suspension or Deluxe
Suspension Seat. Adds approximately 1 inch
(2.5 cm) to seat height. Seat Isolation System
is standard on all units.
with Custom Ride Seat Suspension or Deluxe
Suspension Seat. Adds approximately 1 inch
(2.5 cm) to seat height. Seat Isolation System
is standard on all units.
•
Mounting: Hinged seat frame to tilt up seat. Held
in tilted position with prop rod. Adjustable fore
and aft on seat tracks.
in tilted position with prop rod. Adjustable fore
and aft on seat tracks.
•
Armrests:
– Standard seat: foam padded adjustable flip-up
armrests.
– Suspension seat: molded adjustable flip-up
armrests.
•
Seat Safety Switch:
Integrated seat switch. Time delay seat switch
eliminates rough ground cut-outs.
eliminates rough ground cut-outs.
Hydrostatic Ground Drive System
•
Two unitized hydrostatic transmissions:
– 48 and 52 inch decks:
◊ 12cc Parker axial piston pump
◊ 240cc Parker geroler motor
– 60 and 72 inch decks:
◊ 16cc Parker axial piston pump
◊ 280cc Ross geroler motor
•
Hydraulic Oil Type: Exmark Premium Hydro oil.
•
Hydraulic Oil Capacity: 52 oz (1.5 L) per side
•
Hydraulic Filter: P/N 116-0164
•
Speeds:
– 12cc
◊ 0-10 mph (16.1 km/hr) forward.
◊ 0-5.5 mph (8.9 km/hr) reverse.
– 16cc
◊ 0-11.5 mph (18.5 km/hr) forward.
◊ 0-6 mph (9.7 km/hr) reverse.
•
Drive wheel release valves allow machine to be
moved when engine is not running.
moved when engine is not running.
Tires & Wheels
Drive
Front Caster
Pneumatic
(Air-Filled)
(Air-Filled)
Semi-Pneumatic
Quantity
2
2
Tread
“Multi-Trac
C/S”
C/S”
Smooth
Size (60 & 72
Decks)
Decks)
24 x 12.00-12
13 x 6.50-6
Size (48 & 52
Decks)
Decks)
24 x 9.50-12
13 x 5.00-6
Ply Rating
4
Pressure
13 psi (90 kPa)
15