Sanyo E11A202U Manual Do Utilizador

− 22 −

9.4 UPS Shutdown (Daily)

Note

Do not touch MAIN MCCB when you perform a daily shutdown. Leave it set to the “ON” position.

*Note

The length of time to keep

held down varies depending on the setting of item “⑨

switch response time” in §10.1 “Setup Menu Item List”. Operate as follows.

When “1 second” is selected: Hold for 1 second.
When “3 seconds” is selected: Hold for 3 seconds.

When “Special operation” is selected: Hold

for 3 seconds until the buzzer starts beeping, and then

hold

for 3 seconds more while the buzzer is beeping.

9.5 UPS Shutdown (If Not to Be Used for More Than a Week)

Note

If input power is shut off while the UPS is operating, the batteries are discharged the
same as during an extended power outage. Be aware that when the input supply is

restored, the full capacity of the back-up function will not be available until the batteries

have had time to recharge.

Hold for 1 second.*

②

Set MAIN MCCB to the “OFF” position.

All of the

LEDs go off.

Buzzer

Musical trill

LEDs

Green INPUT

Lit

Green INV.ON/STAND BY

Off

Green OUTPUT

Off

① Press and / hold

for 1 second.