Texas Memory Systems RamSan-300/320 Manual Do Utilizador

 

 

 

The RamSan allows system monitoring and configuration through the 

serial port and the Ethernet port.  To access the system’s Ethernet port, 
the administrator must assign the RamSan an IP address, subnet mask, 
and possibly a gateway.  The administrator may assign the IP address in 

one of three ways: Static IP, DHCP, or No Ethernet.  The default factory 
setting is DHCP. 

 

For any questions regarding IP assignment values, please consult your 
network administrator. 

To setup the Ethernet via the Front Panel, use the arrow buttons to 
cycle through the top-level menu options until the display shows 

“Ethernet Setup.”  Use the Select button to choose this option 
and continue with the configuration.  You may now use the arrow 

buttons to scroll through the following menu options:  
 

•  Displays a list of the 

current IP 
configuration, 

hostname, IP 
address, subnet 

mask, gateway 
address (if 

applicable), and 
hardware Ethernet 

address.   

 

 

•  To continue setting 

up the Ethernet 
configuration 

 

 

•  Shuts down and 

restarts the 
Ethernet port using 

the current IP 
assignment 

configuration 

 

 

•  Exits the setup 

menu. 

 

 

Show Current Config 

Set IP Config 

Restart Network 

Exit Menu

Use the arrow buttons to scroll up and down through the list.  
Pressing the “Menu” button returns to the previous menu, and 

pressing the “Select” button exits the menu system.  To continue 
setting up the Ethernet configuration, select “Set IP Config.” 

 
After selecting “Set IP Config,” you may use the arrow buttons to 
cycle through:  

RamSan-300/320 User’s Manual 

 

- 25 -