Antec SLK3800B Manual Do Utilizador

At Antec, we continually refine and improve our products to ensure the highest

quality. So it's possible that your new case may differ slightly from the 

descriptions in this manual. This isn't a problem; it's simply an improvement. 

As of the date of publication, all features, descriptions, and illustrations in this

manual are correct.

Your new case features a quiet 400 Watt SmartPower2.0 power supply, with a

main power switch. Make sure you turn the switch to the ON ( I ) position

before you boot up your computer for the first time. Normally, you won't need

to switch to the OFF (O) position, since the power supply includes a soft on/off

feature. This lets you turn your computer on and off by using the soft switch

on your computer case. If your computer crashes and you can't shut it down

using the soft switch, you can switch the main power to the OFF (O) position.

SmartPower models designed for the EU include Power Factor Correction (PFC)

circuitry in accord with European standard regulation code EN61000-3-2. By

altering the input current wave shape, PFC improves the power factor of the

power supply. This results in increased energy efficiency, reduced heat loss,

prolonged life for power distribution and consumption equipment, and improved

output voltage stability.]

1.  Place the case upright on a flat, stable surface. The power supply fan 

(at the back of the case) should be facing you.

Note (not applicable to models designed for the European Union): Before 

installation, check the red voltage switch setting on the power supply. It 

should match your local voltage (115V for North America, Japan, etc. and 

230V for Europe and many other countries). If it doesn't match, please 

change the setting. If you don't, you could damage your equipment and 

void your warranty.

2. Completely loosen the two thumbscrews that secure the right side panel.  

(Note: they remain attached to the panel so you won't easily lose them.)

3.  There are two latches on the side panel. Press the releases on each latch.

The latches will pop up partially. Disengage the latches by pushing them 

fully out to the 90-degree position, and remove the panel by swinging it out.

4.  Inside the case you should see the power supply, some wiring with marked 

connectors (USB, PWR etc.), an installed I/O panel and a power cord. You 

will also find an expansion slot protective cover mounted above the 

expansion slots.

5.  Place the case with the front bezel facing you and press the release tabs 

on the bottom of the bezel to remove the front bezel. Set the bezel aside in

a safe place.

This manual is intended only as a guide for Antec's Computer Enclosures. For more comprehensive
instructions on installing your motherboard and peripherals, please refer to the user's manuals which
come with your components and drives.

2