Antec CP-850 Manual Do Utilizador
A
DVANCED
H
YBRID
C
ABLE
M
ANAGEMENT
The CP-850 uses Advanced Hybrid Cable Management. Cables that are important or mandatory are
permanently connected to the PSU for the highest quality power delivery. There are modular jacks
on the back of the PSU to add additional cables as needed. Using only the cables you need will
reduce clutter and improve airflow inside your case. For the list of connected and optional cables,
see Table 2.
permanently connected to the PSU for the highest quality power delivery. There are modular jacks
on the back of the PSU to add additional cables as needed. Using only the cables you need will
reduce clutter and improve airflow inside your case. For the list of connected and optional cables,
see Table 2.
T
HE
M
ODULAR
C
ABLE
J
ACKS
There are two black jacks and two red jacks on the back of your CP-850 PSU. These jacks are for
the optional cables that come with your power supply. The black connectors are used for Molex or
SATA cables. Because of the high power requirements of modern graphics cards, the red ones are
set up to handle their needs. If you are not using the red connectors for PCI-Express connectors,
then you can use them for additional Molex or SATA cables as needed.
the optional cables that come with your power supply. The black connectors are used for Molex or
SATA cables. Because of the high power requirements of modern graphics cards, the red ones are
set up to handle their needs. If you are not using the red connectors for PCI-Express connectors,
then you can use them for additional Molex or SATA cables as needed.
T
ABLE
2
Cable Quantity Power Connectors
Part Name
Description
N/A
Power supply direct cabling
24-pin (20+4) main connector
4-pin ATX12V
8-pin EPS12V
2×8-pin (6+2) PCI-E
3×Molex + 1×Floppy
3×SATA
2
x 3
Molex connector w/cable
Includes three
Molex connectors
2
x 3
Serial ATA connector w/cable
Includes three Serial ATA connectors
2
x 1
PCI-Express connector w/cable
Includes one 6-pin
PCI-Express connector