Optoma Technology X600 Manual Do Utilizador

4

Precautions

 

Please follow all warnings, precautions and  

maintenance as recommended in this user’s 

guide.

▀

■ 

Warning-

Do not look into the projector's lens when the 

lamp is on. The bright light may hurt your eyes.

▀

■ 

Warning-

To reduce the risk of fire or electric shock, do 

not expose this projector to rain or moisture.

▀

■ 

Warning-

Please do not open or disassemble the  

projector as this may cause electric shock.

▀

■ 

Warning-

When replacing the lamp, please allow the unit 

to cool down. Follow instructions as described 

▀

■ 

Warning-

This projector will detect the life of the lamp  

itself. Please be sure to change the lamp when it 

shows warning messages.

▀

■ 

Warning-

Reset the "Lamp Reset" function from the  

on-screen display "System|Lamp Setting" menu 

after replacing the lamp module  

▀

■ 

Warning-

When switching the projector off, please ensure 

the cooling cycle has been completed before 

disconnecting power. Allow 90 seconds for the 

projector to cool down.

▀

■ 

Warning-

Do not use lens cap when projector is in opera-

tion.

▀

■ 

Warning-

When the lamp is approaching to the end of its 

life time, the message "Replacement suggested" 

will show on the screen.  

Please contact your local reseller or service cen-

ter to change the lamp as soon as possible.

When the lamp reaches 
the end of its life, the 
projector will not turn 
back on until the lamp 
module has been 
replaced. To replace 
the lamp, follow the 
procedures listed under 
"Replacing the Lamp" 
section on page 66.