Optoma Technology X600 Manual Do Utilizador

48

Options | Advanced

  Direct Power On

Enable or disable Direct Power On.



 On—the projector powers on automatically when AC power is 

supplied.



 Off— the projector must be powered on as normal.

  Signal Power On

Enable or disable Signal Power On.



 On—the projector powers on automatically when an active 

signal is detected.



 Off— disable the power on trigger by active signal is detected.

1.  Only available on Standby Mode is Active.
2.  If projector is turned off with keeping input the signal source 

(the last image source showing on screen), it will not re-start 

unless:
a.  Terminate the last image source and input any signal source 

again.

b.  Unplug and re-plug the projector power again.

3.  Signal power on will ignore “source lock” setting.