Optoma Technology X600 Manual Do Utilizador

English

79

Command

Description

Remark (Parameter)

Config-URL

Device’s IP address
LAN IP address is shown up if 

LAN IP address is valid.
Wireless LAN IP address is 

shown up if Wireless LAN IP 

address is valid.

http://xxx.xxx.xxx.

xxx/index.html

Revision

The revision must follow a major.

minor.micro scheme. The revision 

is only increased if the command 

protocol is modified.

1.0.0

 p For wide screen resolution (WXGA), the compatibility support is 

dependent on Notebook/PC models.

 p This AMX function is only to support AMX Device Discovery.

 p The broadcast information only send out through valid interface.

 p Both LAN and Wireless LAN interfaces could be supported at the same 

time.

 p If “Beacon Validator” was used. Please take care below information.

PJLink™ supported commands

The table below shows commands to control the projector using 

the PJLink™ protocol.

  Command Description Remark (Parameter)

Command

Description

Remark (Parameter)

POWR

Power control

0 = Standby
1 = Power on

POWR?

Inquiry about the 

power state

0 = Standby
1 = Power on
2 = Cooling down
3 = Warming up

INPT

INPT Input switching

11 = VGA1