Mitsubishi Electronics XL550U Folheto

Página de 2
The  Mitsubishi  Electric  XL550U  projects  out-
standing brightness of 3100lm. Treat the audience 
to high-caliber images without adjusting the lights, 
even in classrooms or large lecture halls.
Brightness 3100lm
Supported by our optimum design for light source 
lamp  temperature  control,  maximum  light  source 
lamp  use  soars  to  5,000  hours.*
1
  This  makes 
dramatic reductions in running cost, while likewise 
slashing  replacement  hassle  for  the  light  source 
lamp as a consumable part. *
2
Long Life Lamp ~ Maximum 5,000 hours
Lamp Replacement Frequency*
(*): Lamp life refers to the average time required for brightness to be 
      reduced by half, and not the time specified in the warranty.
1,500-hour
lamp
5,000-hour
lamp
1,500 hours
5,000 hours
1st replacement
Reduced
running
cost
1st
replacement
2nd
replacement
3rd
replacement
4th
replacement
(*1): When used at the low lamp mode. Maximum lamp life at standard mode 
use is 2,000 hours. (*2): Lamp life refers to the average time required for 
brightness to be reduced by half, and not the time specified in the warranty. Use 
time may vary widely by the environment and conditions, and whether or not 
cleaning and other maintenance procedures are followed.
1000lm
3100lm
Conventional fan
Mitsubishi proudly presents 
Quiet Running Design 
of 22dBA*
1
,
 slashing the fan noise level to 1/16th*
2
 
that  of  our  conventional  model.  Concentrate  on 
presentations free of fan noise concern. 
Fan Noise 22dBA*
1
(*1): When used at low lamp mode. (*2:) The XL55OU reduces fan noise to 22dBA 
(compared to 34dBA in the conventional model).
Note: Mitsubishi Electric cannot accept responsibility for thefts occurring despite
          use of this safety feature. 
Security Anchor
A  robust  key-lock  chain 
may  be  passed  through 
the  projector  hook.  This 
reliable  anti-theft  measure 
helps prevent unauthorized 
removal  of  the  projector 
unit  from  the  premises. 
XL550U fan
The  lamp  may  be 
removed from the side of 
the  projector  unit.  This 
simplifies  replacement 
without 
turning 
the 
projector  around  or  over 
when  suspended  from 
the ceiling or resting on a 
shelf.
Lamp Side Replacement
MULTIMEDIA DATA/VIDEO PROJECTORS