ADC MM701G Manual Do Utilizador
Complete a Quick Installation
64
MM701G and MM702G User Manual
C
OMPLETE
A
Q
UICK
I
NSTALLATION
In a quick installation, you change configuration only for the Central-Office mode modem. The
Remote modem uses its factory default parameters. To set up the Central-Office modem, follow
the instructions in the following sections. The modems use a default bridging WAN session
(
Remote modem uses its factory default parameters. To set up the Central-Office modem, follow
the instructions in the following sections. The modems use a default bridging WAN session
(
RFC1483-bridged
) which has a predefined ATM connection using Virtual Path ID of 0 and
Virtual Channel ID of 35.
Configure for Central-Office Mode
1
Select
DSL
on the menu bar, then select
Advance Configuration
under
[DSL Options]
.
2
In the
Operating Mode
box, select
Central-Office
to set up this modem for this mode.
3
Click
Apply
.
The modem is shipped with factory defaults as a Remote modem and does not
require any additional configuration when used as a remote. Only the
Central-Office modem requires configuration changes.
require any additional configuration when used as a remote. Only the
Central-Office modem requires configuration changes.