HP (Hewlett-Packard) ZE5600 Manual Do Utilizador

 

Service Manual 

Removal and Replacement 

2-19 

 

 

NOTE: This section applies only to HP Pavilion ze5x00, HP nx9010 and HP nx9008, and 
Compaq Presario 2500 models. 

 

1 Phillips screwdriver 

1. Unplug the AC adapter, if present, and then remove the battery. 

2. Remove the keyboard cover (page 2-13). 

3. Disconnect the 2-wire cable that connects the switchboard PCA to the display lid switch. 

4. Remove the two M2.5×4.0mm screws that secure the switchboard PCA to the top case. 

5. Gently lift up on the rear right edge of the switchboard PCA to disconnect the PCA from the 

motherboard. 

6. Remove the switchboard PCA. 

 

HP Pavilion ze5x00,  

HP nx9010 and HP nx9008, and  

Compaq Presario 2500 Models