Cabletron Systems CSX1000 Manual Do Utilizador

Workgroup Remote Access Switch 511

EMOTE

ANAGEMENT

Remote Installation with USER2

EMOTE

NSTALLATION

WITH

USER2

The CyberSWITCH is delivered with a default configuration. This default configuration includes a
configured device, USER2. Advanced users may use the default configuration to perform the
configuration of a remote CyberSWITCH. The network must be setup as illustrated below to take
advantage of remote configuration through USER2.

To begin, you must have an ISDN device with a WAN and LAN connection (we recommend an
CyberSWITCH), a simple two node LAN, and a computer with a TCP/IP stack with a Telnet client
which you can reconfigure.

After you have your setup complete, you must:

Minimally configure the remote CyberSWITCH:
a.

switch type (US only)

point-to-point or point-multi-point line

SPIDS for DMS-100 and NI-1 lines

Configure your local ISDN device using the following information:

Name:USER2
Secret:USER2
Security:CHAP only
WAN IP:2.2.2.3
LAN IP:an unused IP address on your local LAN
Static Route:to 1.1.1.1 (mask 8), next hop 2.2.2.2

single user:
Name:LINK
Secret:LINK
Device Type:PPP
IP Address:2.2.2.2

TCP / IP

Client

User 2

Using

default configuration

ISDN

POWER

SERVICE

10BASE - T

LAN B-CHANNELS E1 ONLY

B2 B4

B6 B8

B26 B28

B22 B24

B18 B20

B14 B16

B10 B12

B30 L1

B1 B3

B5 B7

B25 B27

B21 B23

B17 B19

B13 B15

B9 B11

B29 B31