IBM 12.1(22)EA6 Manual Do Utilizador
B-22
Cisco Systems Intelligent Gigabit Ethernet Switch Modules for the IBM BladeCenter, Software Configuration Guide
24R9746
Appendix B Working with the Cisco IOS File System, Configuration Files, and Software Images
Working with Software Images
•
Before uploading the image file, you might need to create an empty file on the TFTP server. To
create an empty file, enter the touch filename command, where filename is the name of the file you
will use when uploading the image to the server.
create an empty file, enter the touch filename command, where filename is the name of the file you
will use when uploading the image to the server.
•
During upload operations, if you are overwriting an existing file (including an empty file, if you had
to create one) on the server, ensure that the permissions on the file are set correctly. Permissions on
the file should be world-write.
to create one) on the server, ensure that the permissions on the file are set correctly. Permissions on
the file should be world-write.
Downloading an Image File By Using TFTP
You can download a new image file and replace the current image or keep the current image.
Beginning in privileged EXEC mode, follow Steps 1 through 3 to download a new image from a TFTP
server and overwrite the existing image. To keep the current image, omit Step 3.
server and overwrite the existing image. To keep the current image, omit Step 3.
Command
Purpose
Step 1
Copy the image to the appropriate TFTP directory on the
workstation. Make sure that the TFTP server is properly
configured; see the
workstation. Make sure that the TFTP server is properly
configured; see the
.
Step 2
Log into the switch through a Telnet session.
Step 3
archive download-sw /overwrite /reload
tftp:[[//location]/directory]/image-name.tar
tftp:[[//location]/directory]/image-name.tar
Download the image file from the TFTP server to the switch, and
overwrite the current image.
overwrite the current image.
•
The /overwrite option overwrites the software image in flash
with the downloaded image only if the version of the image
being downloaded is the same as the existing copy in flash
memory.
with the downloaded image only if the version of the image
being downloaded is the same as the existing copy in flash
memory.
•
The /reload option reloads the system after downloading the
image unless the configuration has been changed and not been
saved.
image unless the configuration has been changed and not been
saved.
•
For //location, specify the IP address of the TFTP server.
•
For /directory/image-name.tar, specify the directory
(optional) and the image to download. Directory and image
names are case sensitive.
(optional) and the image to download. Directory and image
names are case sensitive.
Step 4
archive download-sw /leave-old-sw /reload
tftp:[[//location]/directory]/image-name.tar
tftp:[[//location]/directory]/image-name.tar
Download the image file from the TFTP server to the switch, and
keep the current image.
keep the current image.
•
The /leave-old-sw option keeps the old software version after
a download.
a download.
•
The /reload option reloads the system after downloading the
image unless the configuration has been changed and not been
saved.
image unless the configuration has been changed and not been
saved.
•
For //location, specify the IP address of the TFTP server.
•
For /directory/image-name.tar, specify the directory
(optional) and the image to download. Directory and image
names are case sensitive.
(optional) and the image to download. Directory and image
names are case sensitive.