Cabletron Systems ZX-250 Manual Do Utilizador
SmartCell ZX-250 User Guide 4-43
Switch Administration
Performing Hardware Maintenance
Figure 4-15 Holding screw for power supply module
T•
Using a medium-size, flat-blade screw driver, loosen the holding screw by turning it at least 90
degrees counter clockwise.
degrees counter clockwise.
Q•
Grasp the power supply module by its handle, then gently pull the power supply module directly out
of the ZX-250 chassis (see Figure 4-16).
of the ZX-250 chassis (see Figure 4-16).
Figure 4-16 RPS module extraction and replacement
Flat-blade Holding
Screw