Cabletron Systems 2200 Manual Do Utilizador

Setting the Mode Switches

Optional Installations and Mode Switch Bank Settings

 shows the location of the mode switches and the switch settings for normal operation. 

These switches are set at the factory and rarely not need to be changed.

Switch definitions and positions are as follows:

Switches 1 through 4 – For Cabletron Systems use only.

Switch 5 – COM Port Autobaud. The default (OFF) position enables Autobaud sensing 
on the COM port for Local Management sessions. Changing the switch to the ON 
position disables Autobaud sensing and sets the COM port to 9600 baud for Local 
Management sessions.

Switch 6 – Forced BootP. 

After changing the position of switch 6, DO NOT reapply power to the chassis until there 
is a station on the network acting as a BootP server, which contains the downloadable 
firmware image file.

2600-11

MODE SWITCH BANK

Primary
Power
Supply

Redundant
Power
Supply