Cabletron Systems 2H28-08R Manual Do Utilizador
Chapter 5: Local Management
5-40
2H28-08R SmartSwitch 2208 User’s Guide
5.11
ETHERNET INTERFACE CONFIGURATION
Access the Ethernet Interface Configuration screen from the Device
Configuration Menu screen by using the arrow keys to highlight the
ETHERNET INTERFACE CONFIGURATION menu item and
pressing ENTER. The Ethernet Interface Configuration
Configuration Menu screen by using the arrow keys to highlight the
ETHERNET INTERFACE CONFIGURATION menu item and
pressing ENTER. The Ethernet Interface Configuration
screen displays.
Figure 5-17
Ethernet Interface Configuration Screen for the 2H28-08R
The following section briefly explains each field of the Ethernet Interface
Configuration screen:
Configuration screen:
Port Num (Read-only)
Identifies the port number.
Port Type (Read-only)
Displays the name of the interface in ports 1 through 8. “Unknown” will
be displayed for port 7 or 8 if a Fast Ethernet Module is not installed in
those ports.
be displayed for port 7 or 8 if a Fast Ethernet Module is not installed in
those ports.
Ethernet Interface Configuration
2159-23
Firmware Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
Device Type: 2H28-08R
2H28-08R LOCAL MANAGEMENT
Event Message Line
SAVE
Port
Num
1
2
3
4
4
5
6
7
8
FE-100FX
FE-100FX
FE-100FX
FE-100FX
FE-100FX
FE-100FX
FE-100FX
FE-100FX
Port
Type
Link
Status
No Link
No Link
No Link
No Link
No Link
Link
No Link
Link
Current
Oper. Mode
100Base-FXFD
100Base-FXFD
100Base-FXFD
100Base-FXFD
100Base-FXFD
100Base-FXFD
100Base-FX
100Base-FX
100Base-FXFD
Desired
Oper. Mode
[100Base-FX]
[100Base-FXFD]
[100Base-FXFD]
[100Base-FXFD]
[100Base-FXFD]
[100Base-FXFD]
[100Base-FXFD]
[Auto-Neg]
[100Base-FXFD]
Advertised Ability
100Base-FX
N/A
N/A
N/A
N/A
N/A
N/A
EXIT
[10Base-TFD] [Enabled]
N/A
Link
RETURN