Cabletron Systems 2H23-50R Manual Do Utilizador
Appendix A: Specifications
A-2
2H23-50R/2H33-37R User’s Guide
A.3
ELECTRICAL SPECIFICATIONS
A.4
ENVIRONMENTAL REQUIREMENTS
A.5
INPUT/OUTPUT PORTS
Line Input Range
Volts (V)
Volts (V)
Input Current
Amperes (A)
Amperes (A)
Frequency
Hertz (Hz)
Hertz (Hz)
Input Power
Volt Amps (VA)
Volt Amps (VA)
100–125 Vac
2.0 A
50/60 Hz
200 VA
200–240 Vac
1.0 A
Operating Temperature:
5°C to 40°C (41°F to 104°F)
Storage Temperature:
-30°C to 73°C (-22°F to 164°F)
Operating Relative Humidity:
5% to 90% (non-condensing)
2E23-50R – CONN 1 through
CONN 4 (ports 1 through 4) or
2E33-37R – CONN 1 through
CONN 3 (ports 1 through 3):
CONN 4 (ports 1 through 4) or
2E33-37R – CONN 1 through
CONN 3 (ports 1 through 3):
Ethernet (10BASE-T and 100BASE-TX
compliant) with RJ21 type connectors.
Each connector provides connection for
12 UTP ports. Each port can operate on
either a 10 Mbps or 100 Mbps segment.
compliant) with RJ21 type connectors.
Each connector provides connection for
12 UTP ports. Each port can operate on
either a 10 Mbps or 100 Mbps segment.
Each port has auto-negotiation
capability to establish maximum
transmission speed (10 Mbps or
100 Mbps).
capability to establish maximum
transmission speed (10 Mbps or
100 Mbps).
2E23-50R – Slots for optional
Fast Ethernet Interface
Modules (ports 5 and 6):
Fast Ethernet Interface
Modules (ports 5 and 6):
Slots accept three types of optional Fast
Ethernet Interface Modules:
FE100-TX, FE100-FX, and FE100-F3.
Ethernet Interface Modules:
FE100-TX, FE100-FX, and FE100-F3.
2E33-37R – Slot for optional
HSIM:
HSIM:
Slot accepts optional High Speed
Interface Modules.
Interface Modules.