Cabletron Systems 2H23-50R Manual Do Utilizador

Chapter 3: Installation

To install the device in a 19-inch rack, note that the device is shipped with 
a rackmount kit containing the rackmount brackets, mounting screws, and 
a strain-relief bracket for cable management.

The installation site must be within reach of the network cabling and meet 
the requirements listed below:

•

Ensure that an appropriate grounded power receptacle is located 
within seven feet of the location.

•

Maintain a temperature of between 5

°

C (41

°

F) and 40

°

C (104

°

F) at 

the installation site with fluctuations of less than 10

°

C (18

°

F) per hour.

To ensure proper ventilation and prevent overheating, leave a 
minimum clearance space of 5.1 cm (2.0 in) at the left, right, 
and rear of the device.

Before installing the device

 

into a rack, ensure that the rack 

supports the device(s) without compromising the stability of the 
rack. Otherwise, personal injury and/or equipment damage 
may result.

22861-06

A = 15 cm (6 in)
B = 57.2 cm (22.5 in)
C = 53 cm (21 in)

C

B

A

D

D = 213 cm (7 ft)