Cabletron Systems 2H23-50R Manual Do Utilizador

To access the High Speed Interface Configuration menu screen from the 
Device Specific Configuration Menu screen, use the arrow keys to 
highlight the HIGH SPEED INTERFACE CONFIGURATION menu 
item and press ENTER. The High Speed Interface Configuration

 menu 

screen, 

, displays.

The High Speed Interface Configuration screen displays the types of 
interfaces installed in slots 5 and 6, their current operating mode, and 
indicates if the ports are linked. This screen also allows the user to enable 
or disable Auto-Negotiation and set the Advertised Ability.

When the HIGH SPEED CONFIGURATION MENU item is 
selected for the 2H33-37R, the applicable HSIM Setup screen 
displays. Refer to the HSIM user’s guide to set operating 
parameters for the HSIM installed in the 2H33-37R.

The High Speed Interface Configuration screen, 

applies only to slots 5 and 6 of the 2H23-50R. This screen 
supports the FE-100TX, FE-100FX, and FE-100F3 Fast 
Ethernet Interface Modules that operate at 100 Mbps.