Juniper Networks EX8208 Manual Do Utilizador
CHAPTER 13
Removing Switch Components
•
•
•
•
•
•
•
•
•
•
•
Removing an AC Power Supply from an EX8200 Switch
The AC power supply in an EX8200 switch is a hot-removable and hot-insertable
field-replaceable unit (FRU). You remove AC power supplies from the front of the chassis.
field-replaceable unit (FRU). You remove AC power supplies from the front of the chassis.
CAUTION: Before you remove a power supply, ensure that you have power supplies
sufficient to power the switch left in the chassis. See “Calculating Power Requirements
for an EX8208 Switch” on page 114 or Calculating Power Requirements for an EX8216
Switch.
sufficient to power the switch left in the chassis. See “Calculating Power Requirements
for an EX8208 Switch” on page 114 or Calculating Power Requirements for an EX8216
Switch.
Before you remove an AC power supply from the switch:
•
Ensure you understand how to prevent ESD damage. See “Prevention of Electrostatic
Discharge Damage on EX Series Switches” on page 292.
Discharge Damage on EX Series Switches” on page 292.
Ensure that you have the following parts and tools available to remove an AC power
supply from an EX8200 switch chassis:
supply from an EX8200 switch chassis:
•
Electrostatic discharge (ESD) grounding strap
•
Phillips (+) screwdriver, number 1
207
Copyright © 2010, Juniper Networks, Inc.