Juniper Networks EX4200 Manual Do Utilizador
Table 15: Network Port Connector Pinout Information for an EX3200 or EX4200 Switch (continued)
Description
Signal
Pin
Transmit/receive data pair 4
TRP4-
8
Related Topics
■
■
Console Port Connector Pinout Information for an EX Series Switch
The console port on an EX Series switch is an RS-232 serial interface that uses an
RJ-45 connector to connect to a console management device. The default baud rate
for the console port is 9600 baud.
RJ-45 connector to connect to a console management device. The default baud rate
for the console port is 9600 baud.
Table 16 on page 41 provides the pinout information for the RJ-45 console connector.
An RJ-45 cable and an RJ-45 to DB-9 serial port adapter are supplied with the switch.
An RJ-45 cable and an RJ-45 to DB-9 serial port adapter are supplied with the switch.
NOTE: If your laptop or PC does not have a DB-9 male connector pin and you want
to connect your laptop or PC directly to an EX Series switch, use a combination of
the RJ-45 to DB-9 female adapter supplied with the switch and a USB to DB-9 male
adapter. You must provide the USB to DB-9 male adapter.
to connect your laptop or PC directly to an EX Series switch, use a combination of
the RJ-45 to DB-9 female adapter supplied with the switch and a USB to DB-9 male
adapter. You must provide the USB to DB-9 male adapter.
Table 16: EX Series Switches Console Port Connector Pinout Information
Description
Signal
Pin
Request to send
RTS Output
1
Data terminal ready
DTR Output
2
Transmit data
TxD Output
3
Signal ground
Signal Ground
4
Signal ground
Signal Ground
5
Receive data
RxD Input
6
Data carrier detect
CD Input
7
Clear to send
CTS Input
8
Related Topics
■
See Rear Panel of an EX2200 Switch for port location.
■
■
Console Port Connector Pinout Information for an EX Series Switch
■
41
Chapter 3: Component Specifications