Cisco Systems 3560 Manual Do Utilizador

Message logging is enabled by default. It must be enabled to send messages to any destination other than 
the console. When enabled, log messages are sent to a logging process, which logs messages to 
designated locations asynchronously to the processes that generated the messages.

Beginning in privileged EXEC mode, follow these steps to disable message logging. This procedure is 
optional.

Disabling the logging process can slow down the switch because a process must wait until the messages 
are written to the console before continuing. When the logging process is disabled, messages appear on 
the console as soon as they are produced, often appearing in the middle of command output.

The logging synchronous global configuration command also affects the display of messages to the 
console. When this command is enabled, messages appear only after you press Return. For more 
information, see the 

To re-enable message logging after it has been disabled, use the logging on global configuration 
command.

Time stamps

Disabled.

Synchronous logging

Disabled.

Logging server

Disabled.

Syslog server IP address

None configured.

Configuration change logger

Disabled

Server facility

Local7 (see 

Server severity

Informational (and numerically lower levels; see 

Enter global configuration mode.

Disable message logging.

Return to privileged EXEC mode.

or

Verify your entries.

(Optional) Save your entries in the configuration file.