Sony SHAKE5 Manual

model name [SHAKE-5]

[4-462-816-12(1)] GB

filename[D:\NORM'S JOB\SONY HA\SO130030\SHAKE-5 (PMRF 
02)\4462816121_GB\080ADD.fm]

masterpage:Right

Ad
di

tio

n

a

l In
fo

rm

at

io

n

• Bluetooth devices and wireless LAN 

(IEEE 802.11b/g) use the same frequency 
band (2.4 GHz). When using your Bluetooth 
device near a device with wireless LAN 
capability, electromagnetic interference may 
occur. This could result in lower data transfer 
rates, noise, or inability to connect. If this 
happens, try the following remedies:
– Try connecting this system and Bluetooth 

device when you are at least 10 meters 
(33 feet) away from the wireless LAN 
equipment.

– Turn off the power to the wireless LAN 

equipment when using your Bluetooth 
device within 10 meters (33 feet).

• The radio waves broadcast by this system may 

interfere with the operation of some medical 
devices. Since this interference may result in 
malfunction, always turn off the power on this 
system and Bluetooth device in the following 
locations:
– In hospitals, on trains, in airplanes, at gas 

stations, and any place where flammable 
gases may be present

– Near automatic doors or fire alarms

• This system supports security functions that 

comply with the Bluetooth specification as a 
means of ensuring security during 
communication using Bluetooth technology. 
However, this security may be insufficient 
depending on the setting contents and other 
factors, so always be careful when performing 
communication using Bluetooth technology.

• Sony cannot be held liable in any way for 

damages or other loss resulting from 
information leaks during communication 
using Bluetooth technology.

• Bluetooth communication is not necessarily 

guaranteed with all Bluetooth devices that 
have the same profile as this system.

• Bluetooth devices connected with this system 

must comply with the Bluetooth specification 
prescribed by the Bluetooth SIG, Inc., and 
must be certified to comply. However, even 
when a device complies with the Bluetooth 
specification, there may be cases where the 
characteristics or specifications of the 
Bluetooth device make it impossible to 
connect, or may result in different control 
methods, display or operation.

• Noise may occur or the audio may cut off 

depending on the Bluetooth device connected 
with this system, the communications 
environment, or surrounding conditions.

With 4 ohm loads, both channels driven, 
from 120 

–

 10,000 Hz; rated 150 watts per 

channel minimum RMS power, with no 
more than 0.7% total harmonic distortion 
from 250 milliwatts to rated output.

The following are measured at
USA model: 

AC 120 V, 60 Hz

Mexican model: 

AC 120 V – 240 V, 60 Hz

European model:

AC 220 V – 240 V, 50/60 Hz

Other models:

AC 120 V – 240 V, 50/60 Hz

Tweeters/woofers

Power Output (rated): 
350 W + 350 W (at 4 ohms, 1 kHz, 
1% THD)
RMS output power (reference): 
600 W + 600 W (per channel at
4 ohms, 1 kHz)

Subwoofers

Power Output (rated):   
350 W + 350 W (at 4 ohms, 100 Hz, 
1% THD) 
RMS output power (reference): 
600 W + 600 W (per channel at 
4 ohms, 100 Hz)

Inputs
TV/DVD/SAT (AUDIO IN) L/R

Voltage 2 V, impedance 47 kilohms

PC/GAME (AUDIO IN) L/R

Voltage 2 V, impedance 47 kilohms

MIC

Sensitivity 1 mV, impedance 
10 kilohms

 A (USB),   B (USB) port: Type A