DELL 6024 Manual Do Utilizador

Configuring Switch Information

325

4

Click Apply Changes. 
The port is attached to the multicast router or switch.

Attaching a LAG to a Multicast Router or Switch

1

Open Bridge Multicast Forward All page.

2

Define the VLAN ID field.

3

Select a port in the LAGs table, and assign the LAG a value. 

4

Click Apply Changes. 
The LAG is attached to the multicast router or switch.

Managing LAGs and Ports Attached to Multicast Routers Using CLI Commands

The following table summarizes the equivalent CLI commands for managing LAGs and ports 
attached to Multicast routers as displayed on the Bridge Multicast Forward All page.

The following is an example of the CLI commands: 

Console# show bridge multicast filtering 1

Filtering: Disabled

VLAN: 1

Forward-All

Port      Static         Status

------    ---------      ---------

g1        -              Filter

g2        -              Filter

...

Table 7-35.

CLI Commands for Managing LAGs and Ports Attached to Multicast Routers

CLI Command

Description

show bridge multicast 

filtering 

vlan-id

Displays the multicast filtering 
configuration.

bridge multicast 

forward-all {add | 

remove} {ethernet 

interface-list

 | port-

channel 

port-channel-

number-list

}

Enables forwarding of all multicast 
packets on a port. Use the no form of this 
command to return to default.