Nortel Networks 5530 Manual Do Utilizador
Filters and QoS Configuration for ERS 5500
Technical Configuration Guide
Technical Configuration Guide
v2.0
NN48500-559
___________________________________________________________________________________________________________________________
Nortel Confidential Information Copyright © 2008 Nortel Networks. All Rights Reserved.
External Distribution
32
9. BPDU
Filtering
BPDU filtering is a feature that when enabled at a port level, will either shutdown a port for a
specific time period or forever when it receives a Spanning Tree BPDU. For all user access ports,
it is recommended to enable Spanning Tree Fast Start in addition to BPDU filtering. If you select
to shut down the port forever, manual intervention is required to bring the port back up by
disabling and then re-enabling the port state.
specific time period or forever when it receives a Spanning Tree BPDU. For all user access ports,
it is recommended to enable Spanning Tree Fast Start in addition to BPDU filtering. If you select
to shut down the port forever, manual intervention is required to bring the port back up by
disabling and then re-enabling the port state.
BPDU filter is enabled at an interface level using the following commands:
•
5520-1(config-if)#spanning-tree bpdu-filtering timeout <10-65535 seconds
or 0 for infinity>
or 0 for infinity>
•
5520-1(config-if)#spanning-tree bpdu-filtering enable
9.1 BPDU
Filtering
Configuration
Assuming we wish to enable BPDU filtering with the timer set to infinity (set to 0) on access ports
1/1 to 1/10, enter the following commands:
1/1 to 1/10, enter the following commands:
•
5520-1(config)#interface fastEthernet 1/1-10
•
5520-1(config-if)#spanning-tree learning fast
•
5520-1(config-if)#spanning-tree bpdu-filtering timeout 0
•
5520-1(config-if)#spanning-tree bpdu-filtering enable
•
5520-1(config-if)#exit