DELL 9.8(0.0) Manual Do Utilizador
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
Usage
Information
Information
To assign traffic to different flows using QoS policy, use the Output Policy map.
This command enables Policy-Map-Output Configuration mode (conf-policy-
map-out).
This command enables Policy-Map-Output Configuration mode (conf-policy-
map-out).
Related
Commands
Commands
using policy maps.
— applies an output policy map to the selected interface.
qos-policy-input
Create a QoS input policy on the router.
S4820T
Syntax
qos-policy-input qos-policy-name cpu-qos | layer2
To remove an existing input QoS policy from the router, use the no qos-policy-
input qos-policy-name cpu-qos | layer2 command.
To remove an existing input QoS policy from the router, use the no qos-policy-
input qos-policy-name cpu-qos | layer2 command.
Parameters
qos-policy-
name
name
Enter the name for the policy map in character format (32
characters maximum).
characters maximum).
cpu-qos
(OPTIONAL) Enter the keyword cpu-qos keyword to assign
this ACL to control plane traffic only.
this ACL to control plane traffic only.
layer2
(OPTIONAL) Enter the keyword layer2 to specify a Layer 2
Class Map. The default is Layer 3.
Class Map. The default is Layer 3.
Defaults
Layer 3
Command
Modes
Modes
CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Quality of Service (QoS)
1479