DELL 9.8(0.0) Manual Do Utilizador

unreachable messages.

interface range

This command permits configuration of a range of interfaces to which subsequent commands are 
applied (bulk configuration). Using the interface range command, you can enter identical commands 

for a range of interface.

S4820T

Syntax

interface range interface {slot/port | port} — port}, interface 
{slot/port | port} — port},...

Parameters

interface {slot/
port | port} — 
port}, interface 
{slot/port | 
port} — port},...

Enter interface range and one of the interfaces and then 
slot/port, port-channel, or VLAN number information. Select 
the range of interfaces for bulk configuration. You can enter 
up to six comma-separated ranges. Spaces are not required 
between the commas. The ranges can include VLANs, port-
channels, and physical interfaces.

• For a port channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE then the slot/port information.

• For a VLAN interface, enter the keyword vlan then a 

number from 1 to 4094.

• For a Tunnel interface, enter the keyword Tunnel then a 

number from 1 to 16383.

Defaults

None

Command 
Modes

CONFIGURATION

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

Interfaces

805