Q-Logic 5600 Manual Do Utilizador
3 – Managing Fabrics
Tracking Fabric Firmware and Software Versions
3-20
59097-02 B
S
3.2.5.1
Enabling SNMP Configuration
To enable SNMP configuration, do the following:
1.
On the faceplate display, open the Switch menu and select SNMP
Properties to open the SNMP Properties dialog.
Properties to open the SNMP Properties dialog.
2.
In the SNMP Configuration area, place a check mark in the SNMP Enabled
check box.
check box.
3.
Click the OK button to save the change to the database.
3.2.5.2
Enabling In-band Management
To enable In-band Management, do the following:
1.
On the faceplate display, open the Switch menu and select Switch
Properties to open the Switch Properties dialog.
Properties to open the Switch Properties dialog.
2.
Click the In-band Management Enable button.
3.
Click the OK button to save the change to the database.
3.3
Tracking Fabric Firmware and Software Versions
The Fabric Tracker option enables you to generate a snapshot or baseline of
current system version information, which can be viewed, analyzed and compared
to other snapshot files, and exported to a file. Information includes date and time,
SANsurfer Switch Manager version, switch active firmware version, device
hardware, drivers, and firmware version from FDMI.
current system version information, which can be viewed, analyzed and compared
to other snapshot files, and exported to a file. Information includes date and time,
SANsurfer Switch Manager version, switch active firmware version, device
hardware, drivers, and firmware version from FDMI.
The Snapshot Analyzer option enables you to:
Compare two snapshots
Detect mismatches of firmware and driver versions
Detect devices that have been moved, added to or removed from the fabric.