Nortel Networks 10BASE-T Manual Do Utilizador
309985-C Rev 00
2-1
Chapter 2
Installing the BayStack 410-24T Switch
This chapter covers the following topics:
•
Installation requirements
•
Installation procedure
•
Instructions for connecting power
•
Instructions for verifying the installation
•
Instructions for the initial (standalone) switch setup
•
Instructions for the initial stack setup
,” to further configure your
BayStack 410-24T switch.
Installation Requirements
Before installing the BayStack 410-24T switch, verify that the package contains
the following items in addition to this guide (see
the following items in addition to this guide (see
Install the BayStack 410-24T switch in a ventilated area that is dust free and away
from heat vents, warm air exhaust from other equipment, and direct sunlight.
Avoid proximity to large electric motors or other electromagnetic equipment.
When choosing a location, observe the environmental guidelines listed in
from heat vents, warm air exhaust from other equipment, and direct sunlight.
Avoid proximity to large electric motors or other electromagnetic equipment.
When choosing a location, observe the environmental guidelines listed in
.” You will need a Phillips screwdriver for
the installation.
Note:
Be sure that the supplied AC power cord matches the requirements for
your region; see
” on