Nortel Networks 10BASE-T Manual Do Utilizador
Using the Console Interface
309985-C Rev 00
3-77
If you are absolutely sure that it is required for your particular legacy router,
configure only the ports that are towards the legacy router as the static router
ports. This action will avoid misconfigurations which can prevent you from
receiving IGMP multicast traffic.
configure only the ports that are towards the legacy router as the static router
ports. This action will avoid misconfigurations which can prevent you from
receiving IGMP multicast traffic.
Multicast Group Membership
The Multicast Group Membership screen allows you to view configured IP
multicast group addresses for specific VLANs. The screen displays the IP
multicast group addresses associated with ports that are configured within a
standalone switch or a stack of switches.
multicast group addresses for specific VLANs. The screen displays the IP
multicast group addresses associated with ports that are configured within a
standalone switch or a stack of switches.
The displayed addresses are dynamic and can change as clients join, or leave, the
various IP multicast groups. You can view changes by refreshing the screen (press
[Ctrl]-P to refresh the screen).
various IP multicast groups. You can view changes by refreshing the screen (press
[Ctrl]-P to refresh the screen).
Choose Display Multicast Group Membership (or press d) from the IGMP
Configuration Menu screen to open the Multicast Group Membership screen.
Configuration Menu screen to open the Multicast Group Membership screen.
Note:
In most cases, configuring ports as Static Router Ports is not necessary
and can prevent you from receiving IGMP multicast traffic. You should
configure a static router port only if you are certain that it is required for your
particular router. Most routers will be dynamically detected as IGMP routers,
in which case no configuration is required.
configure a static router port only if you are certain that it is required for your
particular router. Most routers will be dynamically detected as IGMP routers,
in which case no configuration is required.
Note:
The Multicast Group Membership screen will not display any entries if
” on