Nortel Networks 10BASE-T Manual Do Utilizador
Using the BayStack 410-24T 10BASE-T Switch
3-84
309985-C Rev 00
Before Configuring Your ATM MDA
The BayStack 450-2M3/2S3 MDA has two physical OC-3 ports (A1 and A2).
Each of the physical ports are logically mapped to four LAN emulation clients
(LECs) by default (LEC1 to LEC4).
Each of the physical ports are logically mapped to four LAN emulation clients
(LECs) by default (LEC1 to LEC4).
The LECs can be thought of as virtual ports that perform data forwarding, address
resolution, and other control functions over asynchronous transfer mode (ATM).
resolution, and other control functions over asynchronous transfer mode (ATM).
The default values for the four LECs are Disabled. You cannot enable the LECs
without assigning them to a VLAN. After you assign the LECs to a VLAN, the
LECs become virtual ports (VPorts) and show up in the appropriate CI screens as
if they were a continuation of the switch’s normal port population. For example, in
a 24-port switch, the four VPorts show up in the CI screens as ports 25 to 28.
without assigning them to a VLAN. After you assign the LECs to a VLAN, the
LECs become virtual ports (VPorts) and show up in the appropriate CI screens as
if they were a continuation of the switch’s normal port population. For example, in
a 24-port switch, the four VPorts show up in the CI screens as ports 25 to 28.
You can assign any of the four LECs to either one of the two physical ports to suit
your network needs (for example, you can assign LEC2 and LEC3 to physical port
A1 while LEC 1 and LEC 4 are assigned to physical port A2). The LECs must be
assigned to a VLAN on the switch in order to function properly.
your network needs (for example, you can assign LEC2 and LEC3 to physical port
A1 while LEC 1 and LEC 4 are assigned to physical port A2). The LECs must be
assigned to a VLAN on the switch in order to function properly.
See
” on
for help in assigning VPorts to a
VLAN.
See Using the BayStack 450 10/100/1000 Series Switch (Part number 309978-C)
for an overview of ATM concepts and terminology that relate to the BayStack
450-2M3/2S3 MDA. That guide also provides tips you can use when configuring
your BayStack 450-2M3/2S3 MDA.
for an overview of ATM concepts and terminology that relate to the BayStack
450-2M3/2S3 MDA. That guide also provides tips you can use when configuring
your BayStack 450-2M3/2S3 MDA.
Note:
When you configure your LECs using the following screen examples
and tables, you will be instructed to use the VLAN Configuration screen to
assign the appropriate LEC virtual port number to a VLAN.
assign the appropriate LEC virtual port number to a VLAN.