Netgear M4100-26-POE Manual Do Utilizador

This command eliminates an existing DiffServ class. The <class-map-name> is the name 
of an existing DiffServ class. (The class name ‘default’ is reserved and is not allowed here.) 
This command might be issued at any time; if the class is currently referenced by one or 
more policies or by any other class, the delete action fails.

no class-map <class-map-name>

This command changes the name of a DiffServ class. The <class-map-name> is the 
name of an existing DiffServ class. The <new-class-map-name> parameter is a 
case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the class.

class-map rename <class-map-name> <new-class-map-name>

This command adds to the specified class definition a match condition based on the value of 
the ethertype. The <ethertype> value is specified as one of the following keywords: 
appletalk

, arp, ibmsna, ipv4, ipv6, ipx, mplsmcast, mplsucast, netbios, 

, pppoe, rarp or as a custom ethertype value in the range of 0x0600-0xFFFF.

match ethertype {<keyword> | custom <0x0600-0xFFFF>}

This command adds to the specified class definition a match condition whereby all packets 
are considered to belong to the class. 

match any

Global Config

none

Global Config

Class-Map Config 
Ipv6-Class-Map Config

none

Class-Map Config 
Ipv6-Class-Map Config