Netgear M4100-12G-POE+ Manual Do Utilizador
Routing Commands
309
ProSafe M4100 and M7100 Managed Switches
the command no max-metric router-lsa on-startup. The command no
max-metric router-lsa summary-lsa
max-metric router-lsa summary-lsa
causes OSPF to send summary LSAs with
metrics computed using normal procedures defined in RFC 2328.
Format
no max-metric router-lsa [on-startup] [summary-lsa]
Mode
OSPF Interface Flap Dampening Commands
Dampening
Use this command to enable IP event dampening on a routing interface.
Format
dampening [
half-life period] [reuse-threshold suppress-threshold
max-suppress-time [restart restart-penalty]]
Mode
no dampening
This command disables IP event dampening on a routing interface.
Format
no dampening
Mode
OSPFv2 Router Configuration
Interface Config
Parameter
Description
Half-life period
The number of seconds it takes for the penalty to reduce by half. The configurable range is
1-30 seconds. Default value is 5 seconds.
1-30 seconds. Default value is 5 seconds.
Reuse Threshold
The value of the penalty at which the dampened interface is restored. The configurable range
is 1-20,000. The default value is 1000.
is 1-20,000. The default value is 1000.
Suppress
Threshold
Threshold
The value of the penalty at which the interface is dampened. The configurable range is 1-
20,000. The default value is 2000.
20,000. The default value is 2000.
Max Suppress Time The maximum amount of time (in seconds) an interface can be in suppressed state after it
stops flapping. The configurable range is 1-255 seconds. The default value is four times of
half-life period. If half-period value is allowed to default, the maximum suppress time defaults
to 20 seconds.
half-life period. If half-period value is allowed to default, the maximum suppress time defaults
to 20 seconds.
Restart Penalty
Penalty applied to the interface after the device reloads. The configurable range is 1- 20,000.
The default value is 2000.
The default value is 2000.
Interface Config